接触器触头系统振动机理分析及算法优化

为了解决合闸过程中动、静触头接触引起的振动弹跳问题.本文建立了接触系统的二自由度运动微分方程,并利用遗传算法对交流接触器吸合过程进行优化,同时通过高速摄影实验对接触弹跳的全过程进行了观察和分析.结果表明:理论与实验结果高度一致,铁心在触头分离前发生碰撞,进一步加剧触头弹跳;铁芯弹跳再次碰撞时,触头的弹跳不受影响;在接触器运行过程中,动铁芯的运动会引起系统轻微振动;采用遗传算法优化的接触器触头弹跳时间和最大振幅均减小.研究结果为进一步控制和减小接触弹跳提供了理论依据.     

Pore-scale study of effects of different Pt loading reduction schemes on reactive transport processes in catalyst layers of proton exchange membrane fuel cells

Reducing the Platinum (Pt) loading while maintaining the performance is highly desired for promoting the commercial use of proton exchange membrane fuel cells (PEMFCs). Different methods have been adopted to fabricate catalyst layers (CLs) with low Pt loading, including utilizing lower Pt/C catalysts (MA), mixing high Pt/C catalysts with bare carbon black particles (MB), and reducing CL thickness while maintaining high Pt/C ratio (MC). In this study, self-developed pore-scale model is adopted to investigate the performance of the three Pt reduction methods. It is found that MA shows the best performance while MB shows the worst. Then, effects of Pt dispersion are further explored. The results show that denser Pt sites will result in higher local oxygen flux and thus higher local transport resistance. Therefore, MA method, which shows the better Pt dispersion, leads to improved performance. Third, CLs with quasi-realistic structures are investigated. Higher tortuosity resulting from the random pores produces higher bulk resistance along the thickness direction, while MA still exhibits the best performance. Finally, improved CL structures are investigated by designing perforated CL structures. It is found that adding perforations can significantly reduce the bulk transport resistance and can improve the CL performance. It is demonstrated that CL structure plays important roles on performance, and there are still huge potentials to further improve CL performance by increasing Pt dispersion and optimizing CL structures.     

Creep behaviour of an Al–Si–Al2O3 composite based on phase evolution at 1300oC

An Al–Si–Al₂O₃ composite was prepared with corundum, aluminium powder and silicon powder. A creep test was carried out at 1300°C under 0.2 MPa for 50 h in air. The results show that the Al–Si–Al₂O₃ composite performs a low constant creep rate and remain until the end of the 50-h test. This is attributed to the in-situ formation of the tough non-oxide reinforcements, whisker-like (AlN)_x(Al₂OC)_1-x solid solution and granular β-SiC, by reactions of Al and Si during creep test. The whisker-like (AlN)_x(Al₂OC)_1-x solid solution and granular β-SiC reinforcements are evenly filled in the pores, which play the role of bridging and pinning reinforcement, forming a strong network structure with corundum aggregates. Moreover, these non-oxide phases are not wetted by the liquid phases, which impel the liquid phase shrinks in the network structure in isolation during creep test. Thus, the adverse effect of the liquid phase on the high-temperature strength of the composites is eliminated, so the composites with strong network structure quickly get a stationary low-creep state. A creep mechanism model is established.     

Two Methods,One Goal: Structural Differences between Cocrystallization and Crystal Soaking to Discover Ligand Binding Poses

In lead optimization, protein crystallography is an indispensable tool to analyze drug binding. Binding modes and non-covalent interaction inventories are essential to design follow-up synthesis candidates. Two protocols are commonly applied to produce protein–ligand complexes: cocrystallization and soaking. Because of its time and cost effectiveness, soaking is the more popular method. Taking eight ligand hinge binders of protein kinase A, we demonstrate that cocrystallization is superior. Particularly for flexible proteins, such as kinases, and larger ligands cocrystallization captures more reliable the correct binding pose and induced protein adaptations. The geometrical discrepancies between soaking and cocrystallization appear smaller for fragment-sized ligands. For larger flexible ligands that trigger conformational changes of the protein, soaking can be misleading and underestimates the number of possible polar interactions due to inadequate, highly impaired positions of protein amino-acid side and main chain atoms. Thus, if applicable cocrystallization should be the gold standard to study protein–ligand complexes.     

基于QoE感知的星地一体化网络公平资源分配策略

星地一体化网络是卫星网络和地面网络互联，实现卫星网络和地面网络优势互补的一体化网络。随着无线通信的快速发展，卫星网络和地面网络的同频复用技术可有效提升资源利用效率，满足日益增长的无线数据业务需求。但由于无线数据业务类型的多样化和频谱资源的稀缺性，如何实现用户数据服务的服务体验质量（Quality of experience， QoE）和公平性提升也成为星地一体化网络亟待解决的关键问题。本文综合考虑信道时变性、服务体验多样性和服务公平性，提出了一种基于QoE感知的星地一体化网络资源分配策略。为此，将目标问题描述为基于时间平均的服务体验质量的网络公平效用最大化，并利用李雅普诺夫优化理论，将复杂的动态原始优化问题进一步转化并分解为3个瞬时优化子问题，每个子问题可以在每个时隙独立求解。同时，由于无线资源分配为典型的非凹混合组合优化问题，推导了一个低复杂度的两步算法来求解第三个资源分配子问题。仿真结果揭示了在不同的公平性参数下用户的长时QoE与公平性之间的折衷情况。     

Towards artificial intelligence at scale in the chemical industry

In the Industry 4.0 era, the chemical industry is embracing broad adoption of artificial intelligence (AI) and machine learning (ML) methods. This article provides a holistic view of how the industry is transforming digitally towards AI at scale. First, a historical perspective on how the industry used AI to aid humans in better decision-making is shown. Then state-of-the-art AI research addressing industrial needs on reliability and safety, process optimization, supply chain, material discovery, and reaction engineering is highlighted. Finally, a vision of the plant of the future is illustrated with critical components of AI-ready culture, model life cycle management, and renewed role of humans in chemical manufacturing.     

An automated treatment planning strategy for highly noncoplanar radiotherapy arc trajectories

Radiation therapy is a technology-driven cancer treatment modality that has experienced significant advances over the last decades, due to multidisciplinary contributions that include engineering and computing. Recent technological developments allow the use of noncoplanar volumetric modulated arc therapy (VMAT), one of the most recent photon treatment techniques, in clinical practice. In this work, an automated noncoplanar arc trajectory optimization framework designed in two modular phases is presented. First, a noncoplanar beam angle optimization algorithm is used to obtain a set of noncoplanar irradiation directions. Then, anchored in these directions, an optimization strategy is proposed to compute an optimal arc trajectory. The computational experiments considered a pool of twelve difficult head-and-neck tumor cases. It was possible to observe that, for some of these cases, the optimized noncoplanar arc trajectories led to significant treatment planning quality improvements, when compared with coplanar VMAT treatment plans. Although these experiments were done in a research environment treatment planning software (matRad), the conclusions can be of interest for a clinical setting: automated procedures can simplify the current treatment workflow, produce high-quality treatment plans, making better use of human resources and allowing for unbiased comparisons between different treatment techniques.     

超高层劲性结构及大型机械设备立体协同施工技术

基于某超高层建筑群项目的主体施工阶段,对超高层劲性结构建筑群项目施工过程中可能遇到的问题,诸如大型机械立体协同、钢结构与钢筋连接节点优化、钢结构桁架层施工等重难点进行总结分析,并提出相应的解决方案以供探讨,可为同类型工程提供参考经验。     

基于孪生支持向量回归机的转炉炼钢终点预测

为了提高转炉炼钢的终点命中率，建立了一种新的转炉终点预测模型，实现了对转炉终点碳质量分数和温度的准确预测。模型采用K最近邻孪生支持向量机(KNNWTSVR)算法，将权重矩阵引入到目标函数中，并利用鲸群优化算法进行求解，提高了传统算法的性能；然后基于某炼钢厂260 t转炉的实际生产数据，建立了转炉炼钢终点预测模型。结果表明，预测模型的终点碳质量分数(误差±0.005%)和温度(误差±15 ℃)的终点单命中率分别为94%和88%，双命中率达到84%。与其他两种现有的建模方法相比，本模型取得了最优的预测效果。该方法满足转炉炼钢实际生产的需求，也可适用于钢铁冶金其他领域的数学建模。